The AMIC-10 measures insulation resistance at 50, 100, 250, 500 or 1000 V, with continuous display of the resistance or the leakage current and automatic discharge of the capacitance of the tested object. It also measures the continuity of protective and equipotential conductors, the resistance of low-voltage circuits, capacitance during the test itself, and DC and AC voltage between 0 and 600 V.
Advantages
Five test voltages
Insulation resistance at 50, 100, 250, 500 or 1000 V, with the actual test voltage shown throughout the measurement and protection against accidentally measuring live objects.
Three-wire measurement
Compensates the resistance of the test leads and keeps the voltage on open terminals below 8 V, with automatic discharge of the object's capacitance once the test ends.
More functions in the same meter
Continuity of protective conductors according to EN 61557-4, resistance of low-voltage circuits, capacitance during the insulation test and DC/AC voltage up to 600 V.
Signals during the test
Acoustic signal every five seconds to follow the elapsed time, and an acoustic warning with a green LED when the low-voltage resistance detected is below 30 Ω.
Applications
- Insulation testing of cables, motors and other low-voltage equipment.
- Checking the protective and equipotential conductors of an installation.
- Periodic maintenance of low-voltage electrical installations.
- Continuity and resistance measurement of low-voltage circuits.
About the product
The meter runs on four AA alkaline batteries or a set of Ni-MH rechargeable batteries, with a low-battery indicator on the display, and meets double insulation according to EN 61010-1 and IEC 61557. At 220 × 100 × 60 mm and 1 kg, it is carried in an M6 case with straps and a handle, and comes as standard with a calibration certificate, test leads, probes and a crocodile clip. Optional accessories include 5 m shielded test leads, extra crocodile clips and a WS-04 adapter with a universal Schuko socket.
Technical specifications
| Insulation resistance | 50 kΩ to 250 MΩ (50 V) up to 1 MΩ to 10.0 GΩ (1000 V), according to EN 61557-2 |
| Test voltage | 50, 100, 250, 500 or 1000 V |
| Continuity | 0.10 to 1999 Ω, according to EN 61557-4, current >200 mA |
| Low voltage and resistance | 0 to 1999 Ω, current <15 mA |
| Capacitance | 1 nF to 9.99 μF |
| DC and AC voltage | 0 to 600 V; 45…65 Hz |
| Power supply | 4 AA alkaline batteries or Ni-MH battery set |
| Safety | CAT IV 600 V; IP67 |
| Dimensions and weight | 220 × 100 × 60 mm; 1 kg |
Frequently asked questions
Which test voltages does it support?
50, 100, 250, 500 and 1000 V, each with its own insulation resistance range according to EN 61557-2.
Does it measure anything besides insulation resistance?
Yes: continuity of protective conductors, resistance of low-voltage circuits, capacitance, and DC and AC voltage up to 600 V.
What protection does it have for field work?
IP67 protection and CAT IV 600 V measurement category, weighing 1 kg, with an M6 carrying case.
What powers it?
Four AA alkaline batteries or a set of Ni-MH rechargeable batteries, with a low-battery indicator.
