The AMIC-10 digital insulation resistance meter is used for direct measurements of the insulation resistance of electrical equipment working with voltage up to 1 kV. In addition, this meter makes it possible to measure compensation and protective connections, low-voltage resistance measurements and DC and AC voltage measurements.
Most important features of the equipment:
- Measurement of the insulation resistance:
- Test voltage range: 50, 100, 250, 500 or 1000 V
- Continuous display of insulation resistance or leakage current,
- Automatic discharge of device capacity after insulation resistance measurement
- Acoustic signal every five seconds providing indication of time spent
- Display of actual measuring voltage during measurement
- Protection against measurement of living objects
- Three-wire measurement
- Measurement of the continuity of protective and equipotential conductors according to EN 61557 with >200mA current.
- Low voltage circuit continuity and resistance measurement
- Circuit resistance measurement (<1999Ω) with <15mA current
- Quick audible signal if circuit resistance is below 30.
- Capacitance measurement during RISO measurement
- Measurement of DC and AC voltages in the range of 0...600V
- Power supply: 4 AA batteries or rechargeable batteries, low battery indicator
- Measurement of the continuity of protective and equipotential conductors
Measuring range according to EN 61557-4: 0.10...1999Ω | ||
Range | Resolution | Accuracy |
0,00...19,99Ω | 0,01Ω | ±(2% v.m. + 3 digits) |
20,0...199,9Ω | 0,1Ω | |
2000...1999Ω | 1Ω | ±(4% v.m. + 3 digits) |
Open terminal voltage: <8V | ||
Output current R <2Ω: ISC >200mA | ||
Compensation of the resistance of the test conductors | ||
Unidirectional current flow | ||
Low voltage and resistance measurement
Range
Resolution
Accuracy
00,0...199,9Ω
0,1Ω
±(3% m.v. + 3 digits)
2000...1999Ω
1Ω
Open terminal voltage: <8V
Current on closed terminals 5mA < ISC << 15mA
Acoustic signal green LED if resistance is detected < 30Ω ± 50%
Compensation of the resistance of the test conductors
Capacitance measurement | ||
Range | Resolution | Accuracy |
1...999nF | 1nF | ±(5% m.v. +5 digits) |
1,00...9,99μF | 0,01μF | |
Capacitance value displayed during RISO measurement | ||
For test voltages under 100V and resistances measured under 10MΩ, error of the measured capacitance is not specified | ||
Measurement of the insulation resistance:
Measuring range according to EN 61557-2 for UN =50V: 50kΩ . 250,0MΩ
Range
Resolution
Accuracy
0.0...999,9kΩ
0,1kΩ
±(3%.v.m.. + 8 digits)
1,000...9,999MΩ
0,001MΩ
10.0...99,99MΩ
0,01MΩ
100.0...250,0MΩ
0,1MΩ
Measuring range according to EN 61557-2 for UN =100V: 100kΩ... 500,0MΩ
Range
Resolution
Accuracy
0.0...999,9kΩ
0,1kΩ
±(3%.v.m.. + 8 digits)
1,000...9,999MΩ
0,001MΩ
10.0...99,99MΩ
0,01MΩ
100.0...500,0MΩ
0,1MΩ
Measuring range according to EN 61557-2 for UN =250V: 250kΩ... 2000,0MΩ
Range
Resolution
Accuracy
0.0...999,9kΩ
0,1kΩ
±(3%.v.m.. + 8 digits)
1,000...9,999MΩ
0,001MΩ
10.0...99,99MΩ
0,01MΩ
100,0.. 999,9MΩ
0,1MΩ
1000,0.. 2000,0MΩ
1MΩ
Measuring range according to EN 61557-2 for UN =500V: 500kΩ... 5000,0MΩ
Range
Resolution
Accuracy
0.0...999,9kΩ
0,1kΩ
±(3%.v.m.. + 8 digits)
1,000...9,999MΩ
0,001MΩ
10.0...99,99MΩ
0,01MΩ
100,0.. 999,9MΩ
0,1MΩ
1000,0.. 5000,0MΩ
1MΩ
±(4%.v.m.. + 6 digits)
Measuring range according to EN 61557-2 for UN =1000V: 1000kΩ... 10,0GΩ
Range
Resolution
Accuracy
0.0...999,9kΩ
0,1kΩ
±(3%.v.m.. + 8 digits)
1,000...9,999MΩ
0,001MΩ
10.0...99,99MΩ
0,01MΩ
100,0.. 999,9MΩ
0,1MΩ
1000,0.. 5000,0MΩ
1MΩ
±(4%.v.m.. + 6 digits)
5,0.. 10,0GΩ
0,01GΩ
Measurement of DC and AC voltage
Range
Resolution
Accuracy
0,0...299,9V
0,1V
±(2%v.m. + 6 digits)
300...600V
1V
±(2%v.m. + 2 digits)
Frequency range: 45...65Hz
"v.m." = "measured value."
AMIC-10 detailed features | |
Electrical safety: | |
Type of insulation | Double, according to EN 61010-1 and IEC 61557 |
Measurement category | CAT IV 600V according to EN 61010-1 |
Protection class, according to EN 60529 | IP67 |
Other technical data: | |
Food | 4 alkaline batteries or Ni-MH battery set |
Weight | 1kg |
Dimensions | 220 x 100 x 60 mm |
Standard accessories:
- "Crocodile" K01; black
- 1.2m test cable; red
- 1.2m test cable; blue
- Probe with banana plug; black
- Probe with banana plug; red
- M6 Case
- Straps
- Handle for the equipment
- Calibration certificate
- Battery set
Optional accessories:
- 5m test cable; red
- 5m test cable; blue
- 5m shielded test cable; black
- 1.2m test cable; blue
- "Crocodile" K02; red
- "Crocodile" K01; black
- "Crocodile" K02; blue
- Probe with banana plug; blue
- Adapter WS-04 with UNI-Schuko
Download the catalogue of Isolation resistance meter AMIC-10.
If you want to acquire Up to 1k v with quality, you can also consult prices of Up to 1k v.
If you have any doubts or need advice from our engineers, don't hesitate to contact us and we will be pleased to help you. You can also call us at (+34) 982 20 99 20.